This article is intended for electricians/installers.
Replacement of solenoid/locking mechanism for Charge Amps Aura:
- Turn off the main fuse/switch for the charger.
- Unlock the lid and lift off.
- Unscrew the 3 screws around the charging socket with a Torx chisel (size T10).
- Carefully lift off the charging socket to access the solenoid housing.
- Loosen the two screws on the solenoid housing (Torx chisel, T10).
- Follow the cable upwards towards the circuit board.
- Detach the crimp pins from the circuit board.
- Plug the new solenoid cable into the circuit board.
- With even pressure, hold the solenoid housing against the charging socket and mount with the 2 screws.
- Replace the charging socket, install the 3 screws.
- Install the cover.
- Lock the charger Charge Amps Aura.
- Turn on the main fuse/switch.