Only Admin can activate the function of Green Charging, after the partner enabled this for the admin
Activation of Green Charging by the customer's partner via my.charge.space/partner
The system and that the end user is entered as a user under the measurement device (Charge Amps Amp Guard). It works as long as there is an excess of the production from solar panels.
This can only be done by the customer's partner from my.charge.space/partner
- Go to ''Organizations'' and search for the relevant client using the search bar
2. Press Go To and a new browser will open where you will enter the client's admin interface.
3. Now navigate to Users, enter the customer's email address and then press ''Add''.
4. Further fill in the customer details devise a password for the customer, select User as type.
5. Then send the invitation to the customer by pressing ''save'' and automatically sending the invitation. In a separate message, send his/her chosen password.
6. Have the customer open and confirm the activation link. Then the customer will see the message as shown below.
7. Exit the admin environment and return to the partner account.
8. In the partner account, go to the load balancing page and find the load balancer and deactivate it.
9. Go to Measurement device by clicking on the serial number in blue.
10. Select the User in the user field, make sure both black checkboxes are checked, and then press save.
11. Return to the previous page and reactivate the Loadbalancer group.
12. The settings were done successfully!
13. Now have the customer can log in using their new user account and the Green Charging can be activated.