RFID End User
Below is a guide for configuring RFID tags for the end user.
Note! This only works if you do NOT have load balancing.
1. Log in to your user profile on my.charge.space.
2. In the top header, click on the REMOTE CONTROL tab.
3. In the list of functions is the "RFID Lock" button; make sure it is switched on and in the "ON" position.
4. Read the supplied RFID tag/card by placing it against the centre shield with the Charge-Amps logo on your Halo. The logo will then flash red.
5.Then go to the "PROFILE" tab. Below that is the heading "RFID TAGS". When a tag has been read but not configured, it appears as Latest rejected tag (see image below):
6. Select and copy the tag. Then paste it in the "RFID Tag Id" box.
7. If desired, a comment can also be added under "Comment for tag #".
8. Then click UPDATE.
A limit of one (1) RFID tag is set by default, but can be extended if necessary. If any other tag or card is preferred, it must fulfil the conditions/certificates we support (ISO/IEC 14443 Type A 13.56MHz Mifare).