YouTube demo here (via Installer App)
Configuration & troubleshooting guide WiFi 2.4 GHz connection
How to connect your AURA to a wireless network (WiFi):
1. Restart your AURA (the device only transmits its Wi-Fi for about 10 minutes). 2.
2. Put the device you are configuring in airplane mode and forget/disconnect the available WiFi.
3. search for available networks
4. Find the network AURA_NNNNNNNNNN, where NNNNNN is the last six digits of the serial number.
5. Connect to the AURA_NNNNNNN network and when it asks for a network key, enter the password found in the configuration sheet. If you do not have access to it, contact support and have the purchase documents and serial number of your Aura ready.
6. When you are connected to AURA_NNNNNNNN, you get the message that there is no internet available which is OK.
7. Open a new page in your browser and enter the IP address 192.168.250.1 in your browser's address bar.
8. You will be presented with a configuration page where you can see which WiFi is available for Aura (2.4 GHz network only).
9. You should now see the SSID (network name of your WiFi and signal strength).
10. The signal strength should be at least -85 dBm or better (worse than -85 dBm is shown in red).
11. Enter your wireless network password and tap Update.
If you cannot get your AURA online, try again and then follow the attached troubleshooting manual or contact Charge Amps Support