An Installation Case with Enegic + AURA multiple installation.
The single Enegic will work fine if there is no other consumption on the 250A power supplies.
1. How many terminals (Charge Amps Aura) can be connected to an ENEGIC monitor? - There is no limit of units number. One single Enegic will work fine if there is no other consumption on the 250A power supplies.
The configuration consists of installing a single Enegic on the 900A, then creating 4 virtual "sub-reporters" in the Enegic portal. You will then obtain 4 virtual clones and serial numbers that you will use to create load balancing groups in the Charge Amps portal.
You will therefore need as many "sub-reporters" as there are charger groups. So if there are 4 different charger groups, you need 4 virtual sub-reporters, etc."
2. Is it a problem if the Enegic monitor is 80 meters from the terminals? Would a more powerful ENEGIC allow connection at such a distance? - YES, subject to conditions
The distance between the device and the charger is not a problem in itself. The important thing is that each terminal (AURA) has a stable internet connection. It is difficult to guarantee without knowing the context (quality of network coverage, e.g. in a city, field or underground car park with metal partitions (we've seen this recently!) etc.
3. For this project, the terminals (chargers) will have to be connected in 4G. Do we need one SIM card per terminal (charger)? 4-5 Aura per SIM card maximum recommended. Also, advice to check the quality of the network - THE MINIMUM per AURA is 250kb/s up and down.
4. Are the terminals (AURA chargering stations) connectable to each other via RJ45 cable? - YES they are.
5. Are the two RJ45 ports Input/Output ports? Yes, each Aura has 2 ports, so they can be connected together.